UTS – 100      

The Universal Tracking Solution 100 is a flexible, small, low cost GSM/GPS based tracking device. Used in conjunction with one of our power adapter cables the UTS-100 can be powered from a car or light truck's OBDII port, a heavy truck's JBUS(J1939) connector or even a cigarette lighter. The UTS-100 can also be hard wired to any asset that provides a 10VDC to 16VDC power source.

Some of the features that make the UTS-100 so versatile are:

Hard wired ignition sensing wire

For applications where the user wants to sense a vehicle's ignition status via a wired connection

Virtual ignition sensing

Detect ignition status/events via voltage level vs a wired connection

Input

An Input is provided for applications such as sensing a switch closure.

Output

Use the UTS-100's output wire to activate a light or relay.

Built-in buzzer

Two different buzzer sound patterns can be activated upon sensing ignition on status via a wired connection.

Data/Events Reported By The UTS-100

• Ign On
• Ign Off
• Location
• Altitude
• Speed
• Direction
• Battery low
• Battery disconnect
• Battery reconnect
• Virtual ignition on/off
• Dir Change event
• Speed event
• Geofence event
• Mileage event
• Power up event
• Input High
• Input Low
• Heartbeat
• Miles driven
• GSM signal strength
• # sat used for fix
• GPS accuracy
• UTC date/time 

UTS-100 Hardware Specifications

Frequency Band 850/1900 MHz, 900/1800 MHz
Transmit Power 33 dBm@ 850-900 MHz
                          30 dBm @ 1800-1900 MHz
Status Indicators Network registration/GPRS

GPS position acquisition status
GPS specification
• Receiver 16 channel
• Receiver Sensitivity -158 dBm
• Accuracy +/- 2.5m CEP
• Cold Start <38 sec (@ 45 dB C/N)
• Hot Start < 3 sec (@45 dB C/N)

Network Functionality
• Auto-Register to GPRS network
• GPRS Class B, Multi-Slot 10
• Supports TCP, UDP and FTP
• OTA Firmware Upgrade Using FTP
• SMS connectivity

Power Requirement
• D.C Power 10-16V
• GSM 850 23 mA average @12V
• GSM 1900 20mA average @12V

Physical Connection
• Power and input/output 14 pin Micro Fit Connector
• Optional GPS Antenna SMA female

Mechanical
Case Material ABS plastic
Dimensions 2.0” X 1.8” X 1”
Weight <2 oz.
Operating Temperature -30°C to +75°C

UTS-OBDII

UTS-100 to OBDII power adapter cable.

UTS-OBDII adapter shown with UTS-100 attached



UTS-JBUS

UTS-100 to JBUS (J1939) power adapter cable.






UTS-CL

UTS-100 to cigarette lighter adapter cable.






UTS-WIRE

UTS-100 to cut wire cable.

UTS Web Site

The UTS web site provides users with a powerful, full feature graphic interface to view and control their UTS-100s. Some of the web site features are:

• Google maps provides high quality mapping anywhere in the world
• Google satellite images worldwide
• Google StreetView interface
• Google location based searches
• Group devices
• Geofencing
• History by trips based on ignition status
• Historical breadcrumb trail
• Speed
• Mileage
• Battery level
• Direction
• Input status
• Output control
• ... and MUCH more